show services application-identification application-system-cache (View)

Syntax

Description

Displays application details saved in application system cache. Use this command to get details about application detected in the traffic, the IP address from where the traffic was initiated, the protocol details, and the application signature that matched at that time stored in application cache.

Options

none	Displays application system cache for the root logical system, all logical systems, and all tenant systems.
`logical-system logical-system-name`	(Optional) Displays application system cache for the specified logical system.
`logical-system all`	(Optional) Displays application system cache for all the logical systems.
`root-logical-system`	(Optional) Displays application system cache for the root logical system.
`tenant tenant-name`	(Optional) Displays application system cache for the specified tenant system.
`tenant all`	(Optional) Displays application system cache for all the tenant systems.

Required Privilege Level

view

Output Fields

Table 1 and Table 2 list the output fields for the show services application-identification application-system-cache command. Output fields are listed in the approximate order in which they appear.

Table 1: show services application-identification application-system-cache Output Fields
Field Name	Field Description
`application-cache`	On or Off status of the application cache.
`nested-application-cache`	On or Off status of the nested application cache.
`cache-unknown-result`	On or Off status for caching unknown results.
`cache-entry-timeout`	The number of seconds the mapping information is saved.
pic	PIC number of the accumulated statistics.
`Logical system name`	Name of a specific logical system.
`IP address`	IP address.
`Port`	Port number.
`Protocol`	Type of protocol.
`Application`	Name of the application.
`Encrypted`	Yes or No to identify the traffic as encrypted or not.

Table 2: show services application-identification application-system-cache Output Fields (For Unified Policies)
Field Name	Field Description
`application-cache`	On or Off status of the application cache.
`Cache lookup for security-services`	On or Off status of the application cache for security services such as security policies, application firewall (AppFW), Juniper ATP Cloud, IDP, and Content Security. By default, the ASC is disabled for the security services.
`Cache lookup for miscellaneous-services`	On or Off status of the application cache for miscellaneous services such as APBR and AppTrack. By default, the ASC is enabled for the miscellaneous services.
`cache-entry-timeout`	The number of seconds the mapping information is saved.

Sample Output

show services application-identification application-system-cache
show services application-identification application-system-cache (Application System Cache Changes with Unified Policy Support)
show services application-identification application-system-cache
show services application-identification application-system-cache tenant TSYS1
show services application-identification application-system-cache tenant all