Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Using the Junos Space CLI to View Users Logged In to the Junos Space GUI

Junos Space administrators can execute the jmp_users command in the Junos Space CLI to view users logged in to the Junos Space GUI.

The command output contains the following details:

  • USER NAME: Specifies the user logged in to the Junos Space GUI

  • IP ADDRESS: Specifies the IP address from which the user has logged in to the Junos Space GUI

  • LOGIN TIME: Specifies the time when the user logged in to the Junos Space GUI

  • NODE NAME: Specifies the name of the Junos Space node to which the user has logged in or, in other words, the Junos Space node that is serving the user

To view the users logged in to the Junos Space GUI by using the Junos Space CLI:

  1. Log in to the Junos Space CLI.

    The Junos Space Settings Menu appears.

  2. On the Junos Space Settings Menu, to access shell, type one of the following numbers:
    • 7, if the Junos Space Appliance is a virtual appliance

    You are prompted to enter the administrator password.

  3. Enter the administrator password.
  4. At the command prompt, type one of the following commands:
    • jmp_users all to view all the users logged in to the Junos Space fabric

      The following sample shows the output of the jmp_users all command:

    • jmp_users -node nodename to view the users logged in to the node specified by nodename; the nodename can be the IP address or the host name of the node

      The following sample shows the output of the jmp_users -node Node4 command:

    • jmp_users currentnode to list the users logged in to the same node as the administrator, or in other words, served by the node to which the administrator has logged in

      You can also enter only jmp_users, without any options, (default option) to view the users logged in to the same node as the administrator.

      The following sample shows the output of the jmp_users currentnode command, where currentnode is Node3: