Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

set paragon cluster install

Syntax

Hierarchy Level

[edit]

Description

Enable or disable air-gap installation of the Paragon Automation cluster or usage of IPv6 addresses over IPv4 for the cluster configuration. Enable configuration of cluster nodes and VIP addresses from multiple subnets. You can also change the scale mode of your deployment for small and large deployments.

Options

offline-install (true | false)

Set to true to enable air-gap installation or false to disable it.

prefer-ipv6 (true | false)

Use IPv6 addresses over IPv4 addresses for cluster configuration.

enable-l3-vip (true | false)

Configure IP addresses of cluster nodes and VIP addresses from multiple subnets.

scale-mode (small | large)

Configure the scale size of your cluster. If your cluster is small in size with limited devices or you are installing the cluster in a lab, use small scale mode. If your cluster is a production deployment with a large number of devices, use large scale mode.

Required Privilege Level

configure

Release Information

Statement introduced in Juniper Paragon Automation Release 2.0.0.

prefer-ipv6 option introduced in Juniper Paragon Automation Release 2.2.0.

enable-l3-vip option introduced in Juniper Paragon Automation Release 2.4.0.

scale-mode option introduced in Juniper Routing Director Release 2.5.0.

Related Documentation