ON THIS PAGE
About the Interface Tab (Planner)
On the Interfaces tab of the network table (Planning > Networks > Offline Models > Model-Name > Open), view the information about interfaces in your network model.
Use the Interfaces tab to view details of the interfaces present on the device. The details include interface name, MAC address, operational status, speed, duplex mode, and so on. You can view and modify the interface name, the IP address (IPv4 or IPv6), the administration status, and the description of the interfaces.
Tasks You Can Perform
You can perform the following tasks from this page:
-
View the details of interfaces present on the chassis, line cards, FPCs, and PICs. See Table 1.
-
Add interfaces to the offline network—Click + to add new interfaces. For more information see Create an Interface (Planner).
-
To perform common actions such as filtering using advanced filter criteria and resetting preferences, see Network Table Overview.
Field Descriptions
Table 1 describes the fields on the Interfaces tab:
|
Field |
Description |
|---|---|
|
Interface Name |
Displays the name of the interface. |
| Device | Displays the name of the device to which the interface belongs to. |
| IPv4 Address/Subnet Mask | Displays the IPv4 address assigned to the interface. |
|
Bandwidth |
Displays the bandwidth of the interface. |
|
Description |
Displays the description of the interface that you have entered at the time of interface creation. |
| VRF | Displays the name of Virtual Routing and Forwarding (VRF) routing instance that the interface is part of. |