ON THIS PAGE
Supported Devices and OS Versions
Paragon Automation Release 2.3.0 supports both Juniper and non-Juniper devices.
Table 1 lists all the devices supported by Paragon Automation and the supported operating system (OS) versions.
Device Family |
Device Series |
Supported OS Version |
---|---|---|
ACX Series |
|
Junos OS Evolved releases 22.2R3, 22.4R2, 23.2R2, and 23.4R2 |
PTX Series |
PTX10001-36MR, PTX10002-36QDO, PTX10004, PTX10008, PTX10016 |
Junos OS Evolved releases 22.2R3, 22.4R2, 23.2R2, and 23.4R2 Junos OS 22.4R2, |
MX Series |
|
Junos OS releases 22.2R3, 22.4R2, 23.2R2, and 23.4R2 |
EX Series |
Note:
Network management functions and telemetry are supported only on EX4300-48MP. Support on other EX4300 models is limited to basic network management functions such as device reboot, software upgrade, configuration backup, audit logs, and so on. |
Junos OS releases 22.2R3, 22.4R2, 23.2R2, and 23.4R2, |
Supported Non-Juniper Devices
Table 2 lists the non-Juniper devices supported by Paragon Automation.
In this release, support for non-Juniper devices is limited to onboarding the device and configuring the device using REST APIs.
Vendor |
Device Model |
OS Version |
---|---|---|
Cisco Systems |
Cisco 8202 |
IOS-XR 7.9.0 |
Cisco NCS 57C3 |
IOS-XR 7.3.0 |
|
Cisco NCS 5504 |
IOS-XR 7.3.2 |
|
Cisco IOS XRv |
IOS-XR 7.0.0 |
|
Cisco ASR 9902 |
IOS-XR 7.0.0 |
gNMI Support
Device Series and Model |
gNMI Support |
---|---|
ACX Series |
Yes, starting from Junos OS Evolved Release 22.4 and later. |
PTX Series |
Yes, starting from Junos OS Evolved Release 22.4 and later. |
MX Series |
Yes, starting from Junos OS Release 18.3R1 and later. |
EX Series |
Supported only on EX4300-48MP. |