Syslog Log Source Parameters for Array Networks SSL VPN

If JSA does not automatically detect the log source, add a Array Networks SSL VPN log source on the JSA Console by using the syslog protocol.

When using the syslog protocol, there are specific parameters that you must use.

The following table describes the parameters that require specific values to collect syslog events from Array Networks SSL VPN:

Table 1: Syslog Parameters for the Array Networks SSL VPN DSM
Parameter	Value
Log Source name	Type the name of your log source.
Log Source description	Type a description for your log source.
Log Source type	Array Networks SSL VPN Access Gateways
Protocol Configuration	Syslog
Log Source Identifier	Type the IP address or host name for the log source.