SMB Tail Log Source Parameters for iT-CUBE AgileSI

If JSA does not automatically detect the log source, add an iT-CUBE agileSI log source on the JSA Console by using the SMB Tail protocol.

When using the SMB Tail protocol, there are specific parameters that you must use.

The following table describes the parameters that require specific values to collect SMB Tail events from iT-CUBE agileSI:

Table 1: SMB Tail Log Source Parameters for the iT-CUBE agileSI DSM
Parameter	Value
Log Source Name	Type a name for your log source.
Log Source Description	Type a description for the log source.
Log Source type	iT-CUBE agileSI
Protocol Configuration	SMB Tail
Log Source Identifier	Type the IP address, host name, or name for the log source as an identifier for your iT-CUBE agileSI events.