Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Nortel Secure Router

The JSA Nortel Secure Router DSM records all relevant router events by using syslog.

Before you configure a Nortel Secure Router device in JSA, you must configure your device to send syslog events to JSA.

To configure the device to send syslog events to JSA:

  1. Log in to the Nortel Secure Router command-line interface (CLI).
  2. Type the following to access global configuration mode:

    config term

  3. Type the following command:

    system logging syslog

  4. Type the IP address of the syslog server (JSA system):

    host_ipaddr <IP address>

    Where <IP address> is the IP address of the JSA system.

  5. Ensure that remote logging is enabled:

    enable

  6. Verify that the logging levels are configured correctly:

    show system logging syslog

    The following code is an example of the output:

    ------------------------------------ Syslog Setting

    ------------------------------------ Syslog:

    Enabled Host IP Address: 10.10.10.1 Host UDP Port: 514

    Facility Priority Setting:

    facility priority

    ======== ========

    auth: info

    bootp: warning

    daemon: warning

    domainname: warning

    gated: warning

    kern: info

    mail: warning

    ntp: warning

    system: info

    fr: warning

    ppp: warning

    ipmux: warning

    bundle: warning

    qos: warning

    hdlc: warning

    local7: warning

    vpn: warning

    firewall: warning

    You can now configure the log source in JSA.

  7. To configure JSA to receive events from a Nortel Secure Router device: From the Log Source Type list, select the Nortel Secure Router option.