Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuring Syslog for Foundry FastIron

To integrate JSA with a Foundry FastIron RX device, you must configure the appliance to forward syslog events.

  1. Log in to the Foundry FastIron device command-line interface (CLI).
  2. Type the following command to enable logging:

    logging on

    Local syslog is now enabled with the following defaults:

    • Messages of all syslog levels (Emergencies - Debugging) are logged.

    • Up to 50 messages are retained in the local syslog buffer.

    • No syslog server is specified.

  3. Type the following command to define an IP address for the syslog server:

    logging host <IP Address>

    Where <IP Address> is the IP address of your JSA.

    You are now ready to configure the log source in JSA.