Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Niksun

The Niksun DSM for JSA records all relevant Niksun events by using the syslogprotocol.

You can integrate NetDetector/NetVCR2005, version 3.2.1sp1_2 with JSA. Before you configure JSA to integrate with a Niksun device, you must configure a log source and then enable syslog forwarding on your Niksun appliance. For more information about configuring Niksun, see your Niksun appliance documentation.

Syslog Log Source Parameters for Niksun

If JSA does not automatically detect the log source, add a Niksun log source on the JSA Console by using the Syslog protocol.

The following table describes the parameters that require specific values to collect Syslog events from Niksun:

Table 1: Syslog Log Source Parameters for the Niksun DSM

Parameter

Value

Log Source type

Niksun 2005 v3.5

Protocol Configuration

Syslog

Log Source Identifier

Type the IP address or host name for the log source as an identifier for events from your Niksun appliance.