Itron Smart Meter

The Itron Smart Meter DSM for JSA collects events from an Itron Openway Smart Meter by using syslog.

The Itron Openway Smart Meter sends syslog events to JSA by using Port 514. For details of configuring your meter for syslog, see your Itron Openway Smart Meter documentation.

Syslog Log Source Parameters for Itron Smart Meter

If JSA does not automatically detect the log source, add an Itron Smart Meter log source on the JSA Console by using the Syslog protocol.

When using the syslog protocol, there are specific parameters that you must use.

The following table describes the parameters that require specific values to collect Syslog events from Itron Smart Meter:

Table 1: Syslog Log Source Parameters for the Itron Smart Meter DSM
Parameter	Value
Log Source Name	Type a name for your log source.
Log Source Description	Type a description for the log source.
Log Source type	Itron Smart Meter
Protocol Configuration	Syslog
Log Source Identifier	Type the IP address or host name for the log source as an identifier for events from your Itron Openway Smart Meter installation.