Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Pulse Secure Infranet Controller

The Pulse Secure Infranet Controller DSM for JSA accepts DHCP events by using syslog. JSA records all relevant events from a Pulse Secure Infranet Controller.

Before you configure JSA to integrate with a Pulse Secure Infranet Controller, you must configure syslog in the server. For more information on configuring your Pulse Secure Infranet Controller, consult your vendor documentation.

Syslog Log Source Parameters for Pulse Secure Infranet Controller

If JSA does not automatically detect the log source, add an Pulse Secure Infranet Controller log source on the JSA Console by using the Syslog protocol.

When using the syslog protocol, there are specific parameters that you must use.

The following table describes the parameters that require specific values to collect Syslog events from Pulse Secure Infranet Controller:

Table 1: Syslog Log Source Parameters for the Pulse Secure Infranet Controller DSM

Parameter

Value

Log Source type

Pulse Secure Infranet Controller

Protocol Configuration

Syslog

After you configure syslog for your Pulse Secure Infranet Controller, you are now ready to configure the log source in JSA.

Related Documentation