Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Citrix Access Gateway

Configure Syslog on your Citrix Access Gateway to forward events to the JSA console or Event Collector.

  1. Log in to your Citrix Access Gateway web interface.

  2. Click the Access Gateway Cluster tab.

  3. Select Logging/Settings.

  4. In the Server field, type the IP address of your JSA console or Event Collector.

  5. From the Facility list, select a syslog facility level.

  6. In the Broadcast interval (mins), type 0 to continuously forward syslog events to JSA.

  7. Click Submit to save your changes.

The configuration is complete. The log source is added to JSA as Citrix Access Gateway events are automatically discovered. Events that are forwarded to JSA by Citrix Access Gateway are displayed on the Log Activity tab in JSA.

Syslog Log Source Parameters for Citrix Access Gateway

If JSA does not automatically detect the log source, add a Citrix Access Gateway log source on the JSA Console by using the syslog protocol.

When using the syslog protocol, there are specific parameters that you must use.

The following table describes the parameters that require specific values to collect syslog events from Citrix Access Gateway:

Table 1: Syslog Log Source Parameters for the Citrix Access Gateway DSM

Parameter

Value

Log Source type

Citrix Access Gateway

Protocol Configuration

Syslog

Log Source Identifier

Type the IP address or host name for the log source.

The identifier helps you determine which events came from your Citrix Access Gateway appliance.