HP Network Automation
The JSA DSM for HP Network Automation collects events from HP Network Automation software.
The following table describes the specifications for the HP Network Automation DSM:
Specification |
Value |
---|---|
Manufacturer |
Hewlett Packard |
DSM name |
HP Network Automation |
RPM file name |
DSM-HPNetworkAutomation-JSA_version-build_number .noarch.rpm |
Supported versions |
V10.11 |
Protocol |
Syslog |
Event format |
LEEF |
Recorded event types |
All operational and configuration network events. |
Automatically discovered? |
Yes |
Includes identity? |
Yes |
Includes custom properties? |
No |
More information |
Hewlett Packard Network Automation (http://www.hpe.com/software/na) |
To integrate HP Network Automation software with JSA, complete the following steps:
If automatic updates are not enabled, download the most recent version of the following RPMs from the Juniper Downloads in the order that they are listed, on your JSA console:
DSMCommon DSM RPM
HP Network Automation DSM RPM
Configure your HP Network Automation software to send LEEF events to JSA.
If JSA does not automatically detect the log source, add a HP Network Automation log source on the JSA console. The following table describes the parameters that require specific values for HP Network Automation event collection:
Table 2: HP Network Automation Log Source Parameters Parameter
Value
Log Source type
HP Network Automation
Protocol Configuration
Syslog
Log Source Identifier
The IP address or host name of the device from where JSA collects HP Network Automation events.
The following table shows a sample LEEF message from the HP Network Automation DSM:
Event name |
Low level category |
Sample log message |
---|---|---|
Device Snapshot |
Information |
LEEF:1.0|HP|Network Automation|v10|Device Snapshot| devTime=Wed Jul 06 08:26:45 UTC 2016 devTimeFormat=EEE MMM dd HH:mm:ss Z yyyy src=127.0.0.1 eventId=11111111 usrName=UserName eventText=Snapshot of configuration taken |