Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Accessing the Juniper ATP Appliance Central Manager Web UI


To access the Juniper ATP Appliance Central Manager (CM) Web UI, use HTTP/HTTPS and enter the configured Juniper ATP Appliance CM IP address or hostname in a web browser address field, then accept the SSL certificate when prompted. Login is required.


Be sure any distributed devices (additional Collectors or Mac OS X Engines) connected to the Allin- One system are configured with the same device key as defined by the CLI command set passphrase. If you do not set the same passphrase on all devices, you will not be able to see the Collector or the Mac OS X Engine in the Web UI.

To Log in to the Central Manager Web UI

  1. In the Juniper ATP Login window, enter the default username admin and the password juniper.
  2. When prompted to reset the password, re-enter the password juniper as the “old” password, and enter a new password (twice).

The CM Web UI supports passwords up to 32 characters, and at least 8 characters. Letters (uppercase/lowercase), numbers, and special characters can be used with the exception of double-quotes (”), spaces, or backslash characters (\) in passwords.

Web UI Navigation Tabs

  • Dashboard : Review incontext malware summaries lateral progressions and trends: Operations, Research, System, Collectors, Events Timeline.

  • Incidents: View detected incidents and their behaviors.

  • File Uploads: Upload files for analysis.

  • Mitigation: Perform immediate threat verification & mitigation.

Figure 1: Central Manager DashboardCentral Manager Dashboard

The Juniper ATP Appliance CM Dashboard provides in-context and aggregated malware detection information as well as system status and health information. Additional configurations are made from the Configuration tab. Refer to the Operator's Guide for more information.