Configuring T1 and E1 Port Parameters for SAToP Bundles (CTPView)
This topic describes how to configure port parameters for T1/E1 interfaces.
Before you begin:
Log in to the CTPView software at least at the Net_Admin level.
Connect the CTPView server to the CTP device for which you want to configure bundles.
To configure T1 and E1 port parameters for SATop Bundles using CTPView:
- In the side pane, select Bundle > Configuration.
- Run your mouse over the Display and Select an Existing Bundle bar.
- In the table of bundles, select the bundle that you want to modify.
- Under Bundle Options, configure the parameters described in Table 1, and click Click to Submit Bundle AND Port Changes.
Field | Function | Your Action |
---|---|---|
Port Description |
Specifies a description for the port. |
Enter a description of up to 62 alphanumeric characters. Do not use the following characters: ( ; ' " ) ] |
T1/E1 Choice |
Specifies the type of interface. |
Select one:
|
T1 Line Coding |
For T1 interfaces, specifies the T1 encoding method used on this bundle. |
Select one:
|
E1 Connector Type |
For E1 interfaces, configures the termination to work with either coax or RJ-48. |
Select one:
|
Line Buildout |
For T1 interfaces, specifies the line buildout. This option is supported only on IM-8P-T1/E1interface modules. |
Select one:
|
Clock Cfg |
Specifies the type of clocking for the port. |
Select one:
|