ON THIS PAGE
About the Path-Based Steering Profiles Page
You can use the Path-Based Steering Profiles page to view information about path profiles for the tenant profile in which you are logged in.
Tasks You Can Perform
You can perform the following tasks from this page:
View details of path-based steering profiles for the tenant.
Add path-based steering profiles for for the tenant. See Adding Path-Based Steering Profiles.
Edit or delete a path-based steering profile. See Editing and Deleting Path-Based Steering Profiles.
Show or hide columns that contain information about path-based steering profile. Click the Show Hide columns icon in the top right corner of the page and select columns that you want to view on the page.
Search for path-based steering profiles using keywords. Click the search icon. Enter partial text or full text of the keyword in the search bar and press Enter. The search results are displayed.
Field Descriptions
Table 1 shows the descriptions of the fields on the Path-Based Steering Profiles page.
Field |
Description |
Displayed on |
|---|---|---|
Name |
Name of the path-based-steering profile. |
Path-Based Steering Profiles Page (Path Profiles List tab) Detail for Path-Profile-Name pane |
Traffic Type Profile |
Indicates the traffic type profile associated with the path-based-steering profile.
|
Path-Based Steering Profiles Page (Path Profiles List tab) Detail for Path-Profile-Name pane |
Path Preference |
The preferred path for the SLA profile. The available options are:
|
Path-Based Steering Profiles Page (Path Profiles List tab) Detail for Path-Profile-Name pane |
Created by |
The name of the user who created the path profile. |
Path-Based Steering Profiles Page (Path Profiles List tab) |
Priority |
Priority of the path-based steering profile. A value zero (0) indicates lower priority and one (1) indicates highest priority. |
Detail for Path-Profile-Name pane |
Packet Loss |
Target packet loss for the SLA profile. |
Detail for Path-Profile-Name pane |
RTT |
Target round-trip time (RTT) for the SLA profile. |
Detail for Path-Profile-Name pane |
Jitter |
Target jitter for the SLA profile. |
Detail for Path-Profile-Name pane |
SLA Probe Match |
Indicates whether the profile requires the SLA probe to match all SLA criteria (All) or not (Any) . |
Detail for Path-Profile-Name pane |
Session-sampling % |
Indicates the matching percentage of sessions for which you want to run the passive probes. |
Detail for Path-Profile-Name pane |
SLA Violation Counts |
Indicates the number of SLA violations after which you want CSO to switch paths. |
Detail for Path-Profile-Name pane |
Sampling Period |
The sampling period, in milliseconds, for which the path-based steering profile violations are counted. |
Detail for Path-Profile-Name pane |
Switch Cool-off Period |
The waiting period, in milliseconds, only after which you want the link switch to happen if an active link comes back online. This parameter helps prevent frequent switching of traffic between active and backup links. |
Detail for Path-Profile-Name pane |
Path Failover Criteria |
Indicates the path failover criteria for link switching. Path failover occurs when any (Any)of the path-based steering profile parameters is violated or when all (All) the path-based steering profile parameters are violated. |
Detail for Path-Profile-Name pane |
Maximum Upstream Rate |
The maximum upstream rate (in Kbps) for all applications associated with the path-based steering profile. |
Detail for Path-Profile-Name pane |
Maximum Upstream Burst Size |
The maximum upstream burst size (in bytes). |
Detail for Path-Profile-Name pane |
Maximum Downstream Rate |
The maximum downstream rate (in Kbps) for all applications associated with the path-based-steering profile. |
Detail for Path-Profile-Name pane |
Maximum Downstream Burst Size |
The maximum downstream burst size (in bytes). |
Detail for Path-Profile-Name pane |