Viewing Hardware Inventory of Data Center Devices
In Contrail
Networking Release 1909, you can view the hardware inventory of all
data center devices deployed in a fabric using the Contrail Command
user interface (UI). You can use the Hardware Inventory tab in Contrail Command to view the hardware
inventory information. In releases prior to Contrail Networking Release
1909, you had to use the show chassis hardware
command
on the CLI to view the hardware inventory of a data center device.
The hardware inventory contains information about CPU, power supply,
Flexible PIC Concentrators (FPCs), Physical Interface Cards (PICs),
and so on installed in the router or switch chassis of the devices
in the data center fabric. The hardware inventory information of a
device is read and populated, when the fabric onboarding job is initiated
after adding the device to a new or existing fabric; however, you
can also view the hardware inventory information of the device in
real-time.
To view the hardware inventory in the Contrail Command UI, perform the following steps:
Change History Table
Feature support is determined by the platform and release you are using. Use Feature Explorer to determine if a feature is supported on your platform.