Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Aggregate of Network Device Entities

Each network device has multiple entities such as interfaces, kernel, power, fan, and so on. Contrail Insights supports creation of aggregate of network device entities.

  • Charts are viewable for the aggregate.

  • Both static and dynamic rules are supported.

  • SLA health and risk profiles for the aggregate are supported.

Create an Aggregate of Network Device Entities

To create an aggregate of network device entities:

  1. From the Contrail Insights Dashboard, select Aggregates from the drop-down list.

    Figure 1: Create Aggregates from DashboardCreate Aggregates from Dashboard
  2. Select Update Aggregates.

    Figure 2: Update Aggregates from DashboardUpdate Aggregates from Dashboard
  3. Select New Aggregate.

    Figure 3: Configure New AggregateConfigure New Aggregate
  4. Select the Aggregate type as Network Device Entities.

    Figure 4: Select Aggregate Type from DashboardSelect Aggregate Type from Dashboard
  5. Select the network devices you want to monitor by choosing from the Resource drop-down list.

    Figure 5: Select Network Devices to MonitorSelect Network Devices to Monitor
  6. Select the entity type to create an aggregate for.

    Figure 6: Aggregates Entity Types Aggregates Entity Types
  7. Select the entities that are to be monitored.

    Figure 7: Select Entities to MonitorSelect Entities to Monitor
  8. Click Create to create the aggregate.

    Figure 8: Create Aggregate - Dashboard ViewCreate Aggregate - Dashboard View

View Charts for Aggregate of Network Device Entities

  1. From the Contrail Insights Dashboard, select Infrastructure > Aggregates. Then select the aggregate you created.

    Figure 9: Select a Created AggregateSelect a Created Aggregate
  2. The members of the aggregate are displayed. Select Charts to view charts.

    Figure 10: View Members of AggregateView Members of Aggregate
  3. If there are multiple sources, for example, SNMP, GRPC, JTI, select the one you want to view charts for.

    Figure 11: Select Source for Chart DisplaySelect Source for Chart Display
  4. After selecting a source, charts are displayed. To view charts for other sources, select the source from the drop down.

    Figure 12: Aggregate ChartsAggregate Charts

    Figure 13: Select a Different Source from ChartsSelect a Different Source from Charts