You
can view the configuration of an RSVP LSP tunnel service, which enables
you to see the parameters and attributes configured for a service
on the associated devices in the form of configuration statements
and commands that are displayed in the Junos OS CLI interface. You
can use these settings to examine the existing service configuration
and modify it as necessary to correct any traffic-handling problems
or system discrepancies.
To view the configuration of services:
- From the View selector, select Service View. The workspaces that are applicable to routing and tunnel services
are displayed.
- Click the Deploy icon in the Service View of
the Connectivity Services Director banner. The functionalities that
you can configure in this mode are displayed in the task pane.
- Click the plus sign (+) beside Tunnels to view services
based on protocols, and select LSPs to view the LSP services.
- From the Network Services > Tunnels > LSPs task
pane, select Service Provisioning > Manage LSP. The Manage
Network Services page is displayed on the top part of the right pane.
- Select the check box next to a service for which you want
to view the configuration details.
- Click the View Configuration option. The Service
Configuration View dialog box is displayed. The configuration is displayed
in the CLI interface structure and in the form of configuration stanzas.
The left pane displays a tree of devices associated with the
specified service. You can select a Service-name > Device-name in
the left pane of the window to view the configuration parameters of
the corresponding device on the right pane. The right pane contains
two tabs— Service Configuration and Template Configuration.
The Service Configuration tab displays the settings specified for
the service on the device in CLI format. This tab displays the elements
or components specified for a service template in the form of configuration
stanzas and hierarchy levels. This display is similar to the show
command that you can use at a certain [edit] hierarchy level to view
the defined settings. The Template Configuration tab displays the
service attributes and options defined in the service template, if
any, that is associated with the service.
- Click OK to close the dialog box after you
complete viewing the configuration attributes and settings.
