Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Filtering Links, LSPs, and Services by Using the Topology Map Node Shortcut Menu

  1. From the Junos Space user interface, click the Build icon on the Connectivity Services Director banner.

    The workspaces that are applicable to Build mode are displayed on the Tasks pane.

  2. From the View selector, select Topology View.

    The topology map of the sites or zones and the devices configured in each zone using the CSD-Topology is displayed on the upper portion of the page. A table with details of devices, services, links, and LSPs is displayed on the lower portion of the page.

  3. Select the Devices tab on the lower portion of the page.

    The configured device details are displayed in a table.

  4. Select the check boxes beside the devices that you want to view on the topology map.

    The selected devices in the corresponding zones or custom groups are displayed on the topology map.

  5. Mouse over a node icon or set of nodes and right-click to display a menu.

    When you mouse over a device or a node, the name of the device or node is displayed as a tooltip.

    The following options are available on the shortcut menu when you right-click each device or node:

    Select Device

    Highlights the device to indicate that it has been selected among other nodes displayed in the Topology View

    Show Links

    Displays the current route and the defined routes (for example, primary and backup) of the given tunnel in the Topology View. If multiple tunnels are selected, their primary paths are highlighted in the Topology View, and the tunnel currently selected in the path window is highlighted with a different color.

    Hide Links

    Removes the connector lines that are displayed to signify the links from the selected or source device to destination pairs of all tunnels on the topology map

    Filters > Filter LSPs

    Displays the LSPs that match the filter criteria that you specified for LSPs, such as whether LSPs that are up or down must be displayed, and whether delegated LSPs, CSD-Topology–initiated or PCEP–initiated LSPs, or router–initiated or PCC–initiated LSPs must be displayed.

    Filters > Filter Services

    Displays the services that match the filter criteria that you specified for services, such as whether E-Line, IP, or E-LAN services must be displayed