Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Understanding Management Interfaces

The following management interfaces can be used in the evaluated configuration:

  • Local Management Interfaces—The RJ-45 console port on the front panel of a device is configured as RS-232 data terminal equipment (DTE). The administrator can use the command-line interface (CLI) over this port to configure the device from a terminal.

  • Remote Management Protocols—The device can be remotely managed over any Ethernet interface, although the fxp0 interface is the dedicated out-of-band management interface. SSHv2 is the only permitted remote management protocol that can be used in the evaluated configuration. The remote management protocols J-Web and Telnet are not available for use on the device.

Related Documentation