As Crypto Officer, you must establish a root password conforming to the FIPS password
requirements in Password Rules for an Authorized Administrator. When you enable FIPS mode in Junos OS on the device, you cannot configure passwords
unless they meet this standard.
Local passwords are encrypted with the secure hash
algorithm SHA256 or SHA512. Password recovery is not possible in Junos
OS in FIPS mode. Junos OS in FIPS mode cannot boot into single-user
mode without the correct root password.
To enable FIPS mode in Junos OS on the device:
-
Zeroize the device to delete all CSPs before entering FIPS mode. Refer to Understanding Zeroization to Clear System Data for FIPS Mode section for
details.
- After the device comes up in ’Amnesiac mode’,
login using username
root and password "" (blank).
FreeBSD/amd64 (Amnesiac) (ttyu0)
login: root
--- JUNOS 22.3R1-S2.3 Kernel 64-bit JNPR-12.1-20230120.6ccdef2_buil
root@:~ # cli
root>
- Configure root authentication with password at least 10
characters or more.
root> edit
Entering configuration mode
[edit]
root# set system root-authentication plain-text-password
New password:
Retype new password:
[edit]
root# commit
commit complete
- Load configuration onto device and commit new configuration.
Configure crypto-officer and login with crypto-officer credentials.
-
The
fips-mode and jpfe-fips are optional
packages needed for enabling FIPS. These packages are part of Junos OS software.
To enable these packages, use below commands:
root@hostname> request system software add optional://fips-mode Verified fips-mode signed by PackageProductionECP256_2022 method ECDSA256+SHA256
root@hostname> request system software add optional://jpfe-fips Verified jpfe-fips signed by PackageProductionECP256_2022 method ECDSA256+SHA256
-
Configure chassis boundary
fips by setting set system
fips chassis level 1 and commit.
[edit]
root@hostname# set system fips chassis level 1
- After deleting and reconfiguring CSPs, commit will go
through and device needs reboot to enter FIPS mode.
[edit]
root@hostname# commit
Generating RSA key /etc/ssh/fips_ssh_host_key
Generating RSA2 key /etc/ssh/fips_ssh_host_rsa_key
Generating ECDSA key /etc/ssh/fips_ssh_host_ecdsa_key
[edit]
system reboot is required to transition to FIPS level 1
commit complete
- After rebooting the device, FIPS self-tests will run and
device enters FIPS mode.
crypto-officer@hostname:fips>
