Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configure IPsec VPN in FIPS mode

SUMMARY This section provides configuration commands for configuring IPsec in FIPS mode.

IPsec tunnel provides device authentication, confidentiality, and integrity of information traversing a public or untrusted network. Figure 1 shows the IPsec VPN tunnel topology.

Figure 1: IPsec VPN Tunnel Topology

Configure IPsec VPN Service on Router 1

In this section, you configure Router 1 running Junos OS for IPsec VPN.

  1. Configure service set and VPN rules on Router 1.
    Note:

    In FIPS mode, use prompt command for setting pre-shared-key. Type-in pre-shared-key in ASCII format when prompted for secret as below.

    prompt services ipsec-vpn ike policy ike_policy1 pre-shared-key ascii-text

  2. Configure interfaces on Router 1.
  3. Configure routing options on Router 1.

Configure IPsec VPN Service on Router 2

In this section, you configure Router 2 running Junos OS for IPsec VPN.

  1. Configure service set and VPN rules on Router 2.
  2. Configure interfaces on Router 2.
  3. Configure routing options on Router 2.

Verification

Confirm that the configuration is working properly.

Purpose

Verify that IPsec VPN tunnel is created.

Action

crypto-officer@hostname:fips> show services ipsec-vpn ike security-associations detail

crypto-officer@hostname:fips> show services ipsec-vpn ipsec security-associations detail