three-color-policer (Configuring)
Syntax
three-color-policer policer-name | uid {
action {
loss-priority high then discard;
}
filter-specific;
logical-interface-policer;
physical-interface-policer;
shared-bandwidth-policer;
single-rate {
(color-aware | color-blind);
committed-burst-size bytes;
committed-information-rate bps;
excess-burst-size bytes;
}
two-rate {
(color-aware | color-blind);
committed-burst-size bytes;
committed-information-rate bps;
peak-burst-size bytes;
peak-information-rate bps;
}
}
Hierarchy Level
[edit dynamic-profiles profile-name firewall], [edit firewall], [edit logical-systems logical-system-name firewall]
Description
Configure a three-color policer in static firewall filters or dynamic firewall filters in a dynamic client profile or a dynamic service profile.
Options
policer-name—Name of the three-color policer. Reference this name when
you apply the policer to an interface.
uid—When you configure
a policer at the [edit dynamic-profiles] hierarchy level,
you must assign a variable UID as the policer name.
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.
Required Privilege Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.