Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

radius-coa (Adjustment Control Profiles)

Syntax

Hierarchy Level

Description

Configure the shaping rate adjustment controls for the RADIUS CoA application.

Options

priority

Priority of the RADIUS CoA application in the adjustment control profile.

  • Range: 1 through 10; 1 being the highest priority.

  • Default: 1

algorithm

Rate adjustment algorithm used by the RADIUS CoA application.

  • Values:

    • adjust-never—Do not perform rate adjustments.

    • adjust-always—Adjust the shaping rate unconditionally.

    • adjust-less—Adjust the shaping rate if it is less than the configured value.

    • adjust-less-or equal—Adjust the shaping rate if it is less than or equal to the configured value.

    • adjust-greater—Adjust the shaping rate if it is greater than the configured value.

    • adjust-greater-or-equal—Adjust the shaping rate if it is greater than or equal to the configured value.

  • Default: adjust-always

Required Privilege Level

interfaces—To view this statement in the configuration.interface-control—To add this statement to the configuration.