bandwidth-limit (Hierarchical Policer)
Syntax
bandwidth-limit bps;
Hierarchy Level
[edit dynamic-profiles profile-name firewall hierarchical-policer aggregate if-exceeding], [edit dynamic-profiles profile-name firewall hierarchical-policer premium if-exceeding], [edit firewall hierarchical-policer aggregate if-exceeding], [edit firewall hierarchical-policer premium if-exceeding]
Description
Configure the maximum average bandwidth for premium or aggregate traffic in a hierarchical policer.
Options
bps—You
can specify the number of bits per second either as a decimal number
or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000).
Range:
32,000 through 18,446,744,073,709,551,615 on MX Series routers
Note:When you specify a numeric value beyond the supported bandwidth of the PFE, the router caps the bandwidth at the maximum supported bandwidth of the PFE.
Required Privilege Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.