Open Issues
This section lists the known issues in the following Juniper BNG CUPS releases:
-
Juniper BNG CUPS Release 23.4R1
-
Juniper BNG CUPS Release 23.4R2
The following known issues exist in Juniper BNG CUPS Release 23.4R1:
-
The following features are not supported in this release:
-
Layer 2 Tunneling Protocol (L2TP) client (LAC) subscribers, PR1772094
-
BNG User Plane load balancing, PR1753940
-
Subscriber session steering, PR1771270
-
Multicast with multiple BNG User Planes, PR1750447
-
DHCP reauthentication, PR1746803
-
BNG CUPS Controller warm restart, PR1771848
-
Datagram Transport Layer Security (DTLS) for SCI and CPRI, PR1776508
-
-
Load balancing using ifl-set weight does not work correctly. PR1710447
-
Some subscribers may not be able to login or logout during a BNG User Plane switchover. PR1764810
-
Subscriber group configuration commit validation is not performed if the same port is configured in multiple subscriber groups. PR1771290
-
A configured subscriber group cannot be deleted if the user plane is not in the Connected state. PR1774717
-
Unable to bind clients using static address allocation after changing from dynamic to static allocation, by disabling Address Pool Manager through the
delete groups bbe-common-0 access address-pool-manager
command. PR1770724 -
PFCP proxy endpoints are showing incorrect statistics. PR1770387, PR1770390
The following known issues exist in Juniper BNG CUPS Release 23.4R2:
-
BNG User Planes do not validate if the BNG User Plane line card supports subscriber groups subscriber over subscription. PR1791676
-
BNG CUPS Controller command processing issue when commands are entered incorrectly. PR1806751
-
PFCP association is stuck in a disconnecting state for a BNG User Plane when the BNG CUPS Controller becomes unreachable to other BNG User Planes. PR1812890
-
When running over long periods of time, jdhcp service cores are seen. PR1813783
-
Unable to commit any configuration changes. Also, no change commits are failing in a BNG User Plane with active subscribers. PR1814006
-
The show system subscriber-management route summary command displays a negative gateway route count in the new master Route Engine after a BNG User Plane GRES. PR1814125
-
The gateway route is incorrectly installed in the subscriber group's backup BNG User Plane's backup Route Engine. PR1814279
-
After back to back subscriber group switchovers, discard and gateway routes are removed in the active BNG User Plane's backup Route Engine. PR1814342
-
jdhcpd cores occur when the show dhcpv6 server binding command is executed. PR1816995
-
When using the BNG User Plane: mode user-plane transport routing-instance configuration, a reboot is required. PR1819336