pps-limit (Hierarchical Policer)
Syntax
pps-limit pps;
Hierarchy Level
[edit dynamic-profiles profile-name firewall hierarchical-policer hierarchical-policer-name aggregate if-exceeding], [edit dynamic-profiles profile-name firewall hierarchical-policer hierarchical-policer-name premium if-exceeding], [edit firewall hierarchical-policer hierarchical-policer-name aggregate if-exceeding], [edit firewall hierarchical-policer hierarchical-policer-name premium if-exceeding]
Description
Configure the maximum bandwidth in packets per second (pps) for premium or aggregate traffic in a hierarchical policer.
Hierarchical policing is a form of two-color policing that applies different policing actions based on whether the packets are classified for expedited forwarding (EF) or for a lower priority. You apply a hierarchical policer to ingress Layer 2 traffic to allow bursts of EF traffic for short periods and bursts of non-EF traffic for short periods, with EF traffic always taking precedence over non-EF traffic.
Options
pps
—Specify
the number of packets per second either as a decimal number or as
a decimal number followed by the abbreviation k
(1000),
or m
(1000000).
Range: 2 through 24414062
Default: None
Required Privilege Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.