ppp-options (Dynamic PPP)
Syntax
ppp-options { aaa-options aaa-options-name; authentication [ authentication-protocols ]; chap { challenge-length minimum minimum-length maximum maximum-length; local-name name; } ignore-magic-number-mismatch; initiate-ncp (dual-stack-passive | ipv6 | ip) ipcp-suggest-dns-option; lcp-connection-update; mru size; mtu (size | use-lower-layer); on-demand-ip-address; pap; peer-ip-address-optional; local-authentication { password password; username-include { circuit-id; delimiter character; domain-name name; mac-address; remote-id; } } }
Hierarchy Level
[edit dynamic-profiles profile-name interfaces "$junos-interface-ifd-name" unit “$junos-interface-unit”]. [edit dynamic-profiles profile-name interfaces pp0 unit “$junos-interface-unit”]
Description
Configure PPP-specific interface properties in a dynamic profile.
PPP options can also be configured in a group profile with the ppp-options
(L2TP)
statement. The following behavior determines the interaction
between the PPP options configured in a group profile and the PPP options
configured in a dynamic profile:
When PPP options are configured only in the group profile, the group profile options are applied to the subscriber.
When PPP options are configured in both a group profile and a dynamic profile, the dynamic profile configuration takes complete precedence over the group profile when the dynamic profile includes one or more of the PPP options that can be configured in the group profile. Complete precedence means that there is no merging of options between the profiles. The group profile is applied to the subscriber only when the dynamic profile does not include any PPP option available in the group profile.
Options
lcp-connection-update | Enable PPP to act on a Connection-Status-Message VSA (26–218) received by authd in either a RADIUS Access-Accept message or a CoA message. PPP conveys the contents of the VSA in an LCP Connection-Update-Request message to the remote peer, such as a home gateway. This action requires the following to be true:
Otherwise PPP takes no action on the VSA. If you do not enable
the
|
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.