show user-plane class-of-service scheduler-map

Name of the scheduler map.

The name of the dynamic scheduler map object is associated with a generated UID (for example, SMAP-1_UID1002) instead of with a subscriber interface.

Index of the indicated object. Objects having indexes in this output include scheduler maps, schedulers, and drop profiles.

Index values for dynamic CoS traffic control profiles are larger for enhanced subscriber management than they are for legacy subscriber management.

Name of the scheduler.

Classification of a packet affecting the forwarding, scheduling, and marking policies applied as the packet transits the router.

Configured transmit rate of the scheduler (in bps). The rate is a percentage of the total interface bandwidth, or the keyword remainder, which indicates that the scheduler receives the remaining bandwidth of the interface.

Rate limiting configuration of the queue. Possible values are none, meaning no rate limiting, and exact, meaning the queue only transmits at the configured rate.

The buffer rate is the target rate of a VOQ, which is the intended egress queue rate during typical congestion. The target rate is an import parameter for VOQs, as the ratio of the drain rate to the target rate determines how much buffer adjustment happens at ingress.

Amount of transmit delay (in milliseconds) or the buffer size of the queue. The buffer size is shown as a percentage of the total interface buffer allocation, or by the keyword remainder to indicate that the buffer is sized according to what remains after other scheduler buffer allocations.

The size of the buffer as a percent of the total buffer size for the port. The total of all of the explicitly configured buffer size percentages for all of the queues on a port cannot exceed 100 percent.

On QFX10000 switches, the buffer size is the amount of time in milliseconds of port bandwidth that a queue can use to continue to transmit packets during periods of congestion, before the buffer runs out and packets begin to drop.

The alpha value of the shared-buffer pool at the egress buffer partition for each queue.

Scheduling priority: low or high.

Priority of excess bandwidth: low, medium-low, medium-high, high, or none.

Explicit congestion notification (ECN) state:

• Disable—ECN is disabled on the specified scheduler

• Enable—ECN is enabled on the specified scheduler

ECN is disabled by default.

Minimum shaping rate for an adjusted queue, in bps.

Bandwidth adjustment applied to a queue, in percent.

Table displaying the assignment of drop profiles by name and index to a given loss priority and protocol pair.

Packet loss priority for drop profile assignment.

Transport protocol for drop profile assignment.

Name of the drop profile.