Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

show user-plane class-of-service classifier

Syntax

Description

Show mapping of code point to forwarding class/loss priority at user-plane logical interface.

Options

none

Display all classifiers.
classifier-name classifier-name

(Optional) Name of classifier
name name

(Optional) Display named classifier.
type type

(Optional) Displays the classifier of the specified type. The classifier type can be one of the following:

  • dscp—Differentiated Services code point (DSCP)

  • dscp-ipv6—Differentiated Services code point (DSCP) for IPv6

  • exp—MPLS experimental code point

  • ieee-802.1—IEEE-802.1 code point

  • ieee-802.1ad—IEEE-802.1ad (DEI) code point

  • inet6-precedence—IPv6 precedence code point

  • inet-precedence—IPv4 precedence code point

Required Privilege Level

view

Output Fields

Table 1 describes the output fields for the show user-plane class-of-service classifier command. Output fields are listed in the approximate order in which they appear.

Table 1: show user-plane class-of-service classifier Output Fields

Field Name

Field Description

Classifier

Name of the classifier at user plane.

Code point type

Type of the classifier: exp (not on EX Series switch), dscp, dscp-ipv6 (not on EX Series switch), ieee-802.1, or inet-precedence.

Index

Internal index of the classifier.

Code point

Code point value used for classification

Forwarding class

Classification of a packet affecting the forwarding, scheduling, and marking policies applied as the packet transits the router.

Loss priority

Loss priority value used for classification. For most platforms, the value is high or low. For some platforms, the value is high, medium-high, medium-low, or low.

Sample Output

show user-plane class-of-service classifier

show user-plane class-of-service classifier name