Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

show system subscriber-management subscriber-group

Syntax

Description

Displays subscriber group information .

Options

subscriber-group-name

(Optional) Displays information for the specified subscriber group.
redundancy-service service-id

(Optional) Displays information for the specified redundancy service ID.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show system subscriber-management subscriber-group command. Output fields are listed in the approximate order in which they appear.

Table 1: show system subscriber-management subscriber-group Output Fields

Field Name

Field Description

Name

Name of the subscriber group.

ID

ID for the subscriber group.

Mode

The subscriber group mode. The mode can be either Control Plane or User Plane.

Backup Mode

The backup mode for the subscriber group. The backup mode can be either Hot, Warm-enhanced, or Warm-scale.

Oper State

The operational state of the subscriber group. The state can be either Active or Backup.

Vmac

The virtual MAC address for the subscriber group.

Sessions

The number of subscriber sessions for the subscriber group.

Ports

The number of ports associated with the subscriber group. The ports are listed and state whether they are admin-disabled.

Redundancy Services

Grouping of subscriber sessions for full state restoration to become active. Lists the number of redundancy services.

ID

Redundancy service ID number.

PFE-Subscriber-State

The PFE subscriber state. The state can be the following:

  • Flow Only—Partial state subscribers, while in warm-enhanced backup mode.

  • RE Only—Routing engine only subscribers.

  • Full Service—Full state subscribers.

  • Activating—Displays the percentage of subscribers that are activate during the switchover process (0 to 99).

  • Deactivating—Displays the percentage of subscribers that have been deactivated during the switchover process (0 to 99).

  • Exceeded Limit—Switchover failed because the RSMON subscriber limit was reached. Subscriber logout occurs.

Switchover-%

The percent of the sessions that have been fully restored on switchover.

Sample Output

show system subscriber-management subscriber-group

show system subscriber-management subscriber-group

show system subscriber-management subscriber-group

show system subscriber-management subscriber-group subscriber-group-name redundancy-service