show user-plane interfaces interface-set queue

Syntax

Description

Displays information about the interface set queue for BNG User Planes.

Options

Following are all possible options for the show user-plane interfaces interface-set queue command. The options that appear may vary depending on the platform and software release.

interface-set-name

(Optional) Display information about the specified interface set.

Required Privilege Level

view

Output Fields

Table 1 lists all possible fields for the show user-plane interfaces interface-set queue command. The fields that appear may vary depending on the platform and software release.

Table 1: Ethernet show user-plane interfaces interface-set queue Output Fields
Field Name	Field Description
Egress supported	Total number of egress queues supported on the specified interface set.
Egress in use	Total number of egress queues used on the specified interface set.
Queue	Egress or ingress queue number for the statistics being displayed.
Forwarding classes	Forwarding class name for the statistics being displayed.
Queued	Packet and Byte statistics for the specified queue. Packets—Number of packets queued and input rate in packets per second. Bytes—Number of bytes queued and input rate in bytes per second.
Transmitted	Packet and Byte statistics for the specified forwarding class. Packets—Number of packets transmitted and transmit rate in packets per second. Bytes—Number of bytes transmitted and transmit rate in bytes per second. Tail-dropped packets—Number of packets tail dropped. RED-dropped packets—Number of RED-dropped packets for the low, medium-low, medium-high, and high loss priorities. RED-dropped bytes—Number of RED-dropped bytes for the low, medium-low, medium-high, and high loss priorities.

ON THIS PAGE