Verifying AWS Configurations
To verify interface configurations, use the following CLI commands (refer to the CLI Command Reference Guide for more information):
vCore CLI (Mode) & Command |
Purpose |
---|---|
JATP (diagnosis)# setupcheck all |
Run a check of all system components |
JATP (server)# show interface |
Verify interface connectivity and status |
JATP (server)# show ip <interface> |
Verify traffic [example: show ip eth1] |
JATP (server)# ping x.x.x.x |
Ping connected devices. |
JATP (server)# show ip |
Display AWS public and private IP addresses. |
Note:
Be sure to refer to the Juniper ATP Appliance CLI Command Reference for more information.