Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Update Port Channel ID Range

You can update the port channel ID range for generic systems either from the Topology view (as of Apstra version 4.1.2) or from the Nodes view.

CAUTION:

Changing port channel range is an invasive operation and may lead to reassigning existing port channel IDs.

Update Port Channel ID Range (from Topology View)

You can update the port channel ID range from the Topology view as of Apstra version 4.1.2.
  1. From the blueprint, navigate to Staged > Physical > Topology and select the generic system to update.
  2. You can hover over the generic system to see the port channel ID range (and other details).
  3. Select the generic system check box to see the operations available for that generic system (and that you have permissions for).
  4. Click Update Port Channel ID Range, then edit the min and/or max values, as needed.
  5. Click Update to stage your changes and return to the Topology view.

Update Port Channel ID Range (from Nodes view)

  1. From the blueprint, navigate to Staged > Physical > Nodes and click the Edit Port Channel ID Range button (previously called Edit port channel id min max).
  2. In the table of generic systems, edit the min and/or max port channel ID values, as needed.
  3. Click Update to stage your changes and return to the Nodes view.