Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Update Link Speed

To change link speeds between spine-leaf and superspine-spine you must change the rack.

Update Link Speed (Topology View)

From the Topology view, you can update one link speed at a time. (You can update more than one link speed at a time from the Links view; see the next section.)

  1. From the blueprint, navigate to Staged > Physical > Topology and select the node where you want to change link speed.
  2. Select the interface check box to see the operations available for that interface (and that you have permissions for).
  3. Click Update link speed and select the new link speed from the drop-down list.
  4. Click Update to stage your changes and return to the Topology view.

When you're ready to activate your changes, commit them from the Uncommitted tab.

Update Link Speed (Links View)

From the Links view you can update one or more link speeds at the same time.
  1. From the blueprint, navigate to Staged > Physical > Links and click theChange link speeds button.
  2. Select new link speeds for one or more links from the drop-down lists.
  3. Click Update to stage the changes and return to the Links view.

When you're ready to activate your changes, commit them from the Uncommitted tab.