Qualified Device and NOS (Devices)
Recommended qualified NOS versions and device (series) are listed below. For information about additional devices and NOS versions that may be available, contact Juniper Support. Additional NOS versions may be supported on a case-by-case basis.
To request support for NOS not listed, contact your Juniper Apstra Sales representative.
Apstra Release 4.0.2
Device Operating System | Qualified NOS Versions | Supported Device (Series) |
---|---|---|
Juniper Junos OS |
|
|
Juniper Junos OS |
21.2R1-S2.2 |
|
Juniper Junos OS Evolved (spine, superspine and non-EVPN-VXLAN leaf) |
|
|
Enterprise SONiC |
|
|
Cisco NX-OS |
|
Nexus 3000 or 9000 Platform |
Arista EOS |
|
DCS-7000 Series |
Cumulus Linux |
Contact Juniper Support |
Cumulus Linux-supported platforms with x86 CPU processor |
Apstra Release 4.0.1
Device Operating System | Qualified NOS Versions | Supported Device (Series) |
---|---|---|
Juniper Junos OS |
|
|
Juniper Junos OS |
|
|
Juniper Junos OS Evolved - Tech Preview - see section below | 20.4R2-S2.10-EVO |
|
Juniper Junos OS Evolved - Tech Preview - see section below | 20.4R2-S1.4-EVO |
|
Enterprise SONiC |
|
|
Cisco NX-OS |
|
Nexus 3000 or 9000 Platform |
Arista EOS |
|
DCS-7000 Series |
Cumulus Linux | Contact Juniper Support | Cumulus Linux-supported platforms with x86 CPU processor |
Apstra Release 4.0.0
Device Operating System | Qualified NOS Versions | Supported Device (Series) |
---|---|---|
Juniper Junos OS | 20.2R2-S3.5 |
|
Juniper Junos OS | 18.4R2 | QFX5100 - Can't be used as border leaf. It can't route between VXLAN IRB and L3 interface. |
Juniper Junos OS Evolved - Tech Preview - see section below | 20.4R2-S1.4-EVO |
|
Enterprise SONiC |
|
|
Cisco NX-OS |
|
Nexus 3000 or 9000 Platform |
Arista EOS |
|
DCS-7000 Series |
Cumulus Linux | 3.7.13 - For the latest NVIDIA Cumulus Linux support
information, contact Juniper Support
<support> . |
Cumulus Linux-supported platforms with x86 CPU processor |
Juniper Junos OS Evolved on Apstra Versions 4.0.1 and 4.0.0
This feature has been classified as a Juniper Apstra Technology Preview feature. These features are "as is" and for voluntary use. Juniper Support will attempt to resolve any issues that customers experience when using these features and create bug reports on behalf of support cases. However, Juniper may not provide comprehensive support services to Tech Preview features. For additional information, refer to the Juniper Apstra Technology Previews or contact Juniper Support.
On Apstra release versions 4.0.1 and 4.0.0, limited support is provided for
Junos OS Evolved on selected devices on spine and super spine roles only
(not leaf roles). On EVPN fabrics, devices running Junos OS Evolved can be
used as spine or superspine only. For other details and limitations see
Juniper Device Profiles
<juniper_device_profile>
.