Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Add Leaf Peer Links

CAUTION:

Do not use leaf peer links if the platform used does not support it. Currently, Junos devices do not support any peer links, and SONiC devices do not support L3 peer links.
  1. From the blueprint, navigate to Staged > Physical > Topology and select a leaf that is an MLAG member.
  2. Click Add leaf peer links and select the link type.
    • Peer Link - adds a link between the two leafs and adds a BGP session (between the two leafs) in all VRFs.
    • L3 Peer Link - adds a link between the two leafs and adds a BGP session (between the two leafs) in all VRFs.
  3. Select an unused port for each leaf peer member. (Only unused ports are selectable). When a port has been selected for each leaf peer member, the Add Link button becomes clickable.
  4. Click Add Link.
  5. Click Add to stage the addition.