Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Installing and Connecting an EX4300 Switch

To install and connect an EX4300 switch:

  1. Follow instructions in Unpacking an EX4300 Switch.
  2. Install a power supply if it is not preinstalled:
  3. Install a fan module if it is not preinstalled; see Installing a Fan Module in an EX4300 Switch.
  4. Mount the switch by following instructions appropriate for your site:
  5. Follow instructions in Connect Earth Ground to an EX Series Switch.
  6. Follow instructions for connecting power as appropriate for your site:
  7. Register your product by following instructions in Register Products—Mandatory for Validating SLAs.
  8. Perform initial configuration of the switch by following the instructions in Connecting and Configuring an EX Series Switch (CLI Procedure) or Connecting and Configuring an EX Series Switch (J-Web Procedure).
  9. Set the switch’s management options by following the instructions in: