Unmount the SSR1500 Chassis

Remove the SSR1500 from a Rack

Before removing a SSR1500 from a rack:

Here’s what you’ll need to remove the SSR1500 from a rack:

Two people. One to hold the SSR1500 while the other one removes the screws.
Screwdriver appropriate for your rack-mounting screws.

Note:

When you remove multiple devices from a rack, remove the device at the top of the rack first and proceed to remove the rest of the devices from top to bottom.

Read General Safety Guidelines and Warnings.
Power off the SSR1500 (see Power Off the SSR1500).
Disconnect the power cords.
Ensure that you have disconnected any cables or wires attached to the SSR1500.

To remove an SSR1500 from a rack:

Have one person support the weight of the appliance while another person uses the screwdriver to remove the front mounting screws that attach the chassis mounting brackets to the rack.
Remove the SSR1500 from the rack.
Use the screwdriver to remove the mounting screws that attach the mounting blades attached to the rear of the rack.
Place the removed screws and rear mounting blades in a labeled bag. You will need them when you reinstall the chassis.