Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Connect SSR130 to External Devices

Connect SSR130 to a Management Console

Ensure that you have an RJ-45 to DB-9 rollover cable available. An RJ-45 cable with an RJ-45 to DB-9 adapter is provided with the appliance.

Note:

If your laptop or PC does not have a DB-9 pin contact and you want to connect your laptop or PC directly to the SSR130, use a combination of the RJ-45 cable and RJ-45 to DB-9 adapter supplied with the appliance and a USB to DB-9 plug adapter. You must provide the USB to DB-9 plug adapter.

SSR130 has a console port (CONSOLE) with an RJ-45 connector. Use the console port to connect the appliance to a management console or to a console server. The default baud rate of the console port is 115200 bps.

To connect the SSR130 to a management console (see Figure 1 and Figure 2):

  1. Connect one end of the Ethernet cable to the console port (labeled CONSOLE).
  2. Connect the other end of the Ethernet cable into the console server (see Figure 1) or management console (see Figure 2).
Figure 1: Connecting the SSR130 to a Management Console Through a Console ServerConnecting the SSR130 to a Management Console Through a Console Server
Figure 2: Connecting the SSR130 Directly to a Management ConsoleConnecting the SSR130 Directly to a Management Console