Unmount the SSR1200 Chassis
Remove the SSR1200 from a Rack
Before removing an SSR1200 from a rack:
Here’s what you’ll need to remove the SSR1200 from a rack:
Two people. One to hold the SSR1200 while the other one removes the screws.
Screwdriver appropriate for your rack-mounting screws.
Note:
When you remove multiple devices from a rack, remove the device at the top of the rack first and proceed to remove the rest of the devices from top to bottom.
Power off the SSR1200 (see Power Off the SSR1200).
Disconnect the power cords.
Ensure that you have disconnected any cables or wires attached to the SSR1200.
To remove an SSR1200 from a rack:
- Have one person support the weight of the appliance while another person uses the screwdriver to remove the screws that attach the front mounting brackets to the rack.
- Remove the SSR1200 from the rack.
- Use the screwdriver to remove the screws that attach the rear mounting blades attached to the rear of the rack.
- Place the removed screws and rear mounting blades in a labeled bag. You will need them when you reinstall the chassis.