Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

SRX5600 Alarm and Management Cable Specifications and Pinouts

Alarm Relay Contact Wire Specifications for the SRX5600 Firewall

Table 1 lists the specifications for the wires that connect to the alarm relay contacts.

Table 1: Cable and Wire Specifications for Alarm Interfaces

Port

Cable Specification

Cable/Wire Supplied

Alarm relay contacts

Wire with gauge between 28-AWG and 14-AWG (0.08 and 2.08 mm2)

No

Console Port Cable and Wire Specifications for the SRX5600 Firewall

Table 2 lists the specifications for the cable that connects a CONSOLE port on the Routing Engine to a management console.

Table 2: Cable and Wire Specifications for Routing Engine Management and Alarm Interfaces

Port

Cable Specification

Cable/Wire Supplied

Maximum Length

Receptacle

Routing Engine console or auxiliary interface

RS-232 (EIA-232) serial cable

One 6-ft (1.83-m) length with RJ-45/DB-9 connectors

6 ft (1.83 m)

RJ-45/DB-9 plug

RJ-45 Connector Pinouts for the SRX5600 Firewall Routing Engine Ethernet Port

The port on the Routing Engine labeled ETHERNET is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the Routing Engine to a management LAN (or other device that supports out-of-band management). Table 3 describes the RJ-45 connector pinout.

Table 3: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port

Pin

Signal

1

TX+

2

TX-

3

RX+

4

Termination network

5

Termination network

6

RX-

7

Termination network

8

Termination network

RJ-45 Connector Pinouts for the SRX5600 Firewall Routing Engine Auxiliary and Console Ports

The ports on the Routing Engine labeled AUX and CONSOLE are asynchronous serial interfaces that accept an RJ-45 connector. The ports connect the Routing Engine to an auxiliary or console management device. Table 4 describes the RJ-45 connector pinout.

Table 4: RJ-45 Connector Pinout for the AUX and CONSOLE Ports

Pin

Signal

Description

1

RTS

Request to Send

2

DTR

Data Terminal Ready

3

TXD

Transmit Data

4

Ground

Signal Ground

5

Ground

Signal Ground

6

RXD

Receive Data

7

DSR/DCD

Data Set Ready

8

CTS

Clear to Send