Maintaining the SRX550 HM Components
Required Tools and Parts for Maintaining the SRX550 High Memory Services Gateway Hardware Components
The following tools and parts are required to maintain the hardware components of the services gateway:
Electrostatic bag or antistatic mat
Electrostatic discharge (ESD) grounding wrist strap
Flat-blade screw-blade screwdriver, approximately 1/8 in. (3 mm)
Phillips (+) screwdrivers, number 1 and number 2
Routine Maintenance Procedures for the SRX550 High Memory Services Gateway
For optimum performance of the services gateway, perform the following preventive maintenance procedures regularly:
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
Make sure that airflow is unobstructed around the services gateway and into the air intake vents.
Check the status LEDs on the front and back panels of the services gateway.