Safety Information
The Juniper Networks Safety Guide provides general safety information and guidelines for all Juniper Networks products. Follow the guidelines provided in the guide to reduce the likelihood of personal injury, equipment damage, and damage to surrounding areas.
Along with the information provided in the Juniper Networks Safety Guide, you must read and understand the SRX4300 specific safety information provided in this hardware guide.
Boot Time
The boot time for the SRX4300 is approximately 490 seconds.
Warning Statement for Shielded Intra-Building Criteria
The intra-building port(s) of the equipment or subassembly must use shielded intra-building cabling or wiring that is grounded at both ends.
Warning Statement for Unshielded Intra-Building Criteria
Certain ports of a device are designed for use as intra-building (within-the-building ) interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE) and require isolation from the exposed outside plant (OSP) cabling. To comply with NEBS requirements and protect against lightning surges and commercial power disturbances, the intra-building ports must not be metallically connected to interfaces that connect to the OSP or its wiring. The intra-building ports on the device are suitable for connection to intra-building or unexposed wiring or cabling only. The addition of primary protectors is not sufficient protection for connecting these interfaces metallically to OSP wiring.