Management Port Connector Pinouts for the QFX Series
The 1000BASE-T RJ-45 management ports use an RJ-45 connector to connect either to the control plane and management network in a QFabric system, or to a management device for out-of-band management.
Table 1 provides the pinout information of the RJ-45 management port connector. An RJ-45 cable is supplied with the QFX Series device.
The RJ-45 pinout information in Table 1 also applies to the QFX5100-48T device 10GBASE-T access ports.
Pin |
Signal |
Description |
---|---|---|
1 |
TRP1+ |
Transmit/receive data pair 1 |
2 |
TRP1– |
Transmit/receive data pair 1 |
3 |
TRP2+ |
Transmit/receive data pair 2 |
4 |
TRP3+ |
Transmit/receive data pair 3 |
5 |
TRP3– |
Transmit/receive data pair 3 |
6 |
TRP2– |
Transmit/receive data pair 2 |
7 |
TRP4+ |
Transmit/receive data pair 4 |
8 |
TRP4– |
Transmit/receive data pair 4 |