Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

PTX10008 and PTX10016 Agency Approvals and Compliance Statements

Agency Approvals for the PTX10008 and PTX10016 Routers

The PTX10008 and PTX10016 routers are tested against the following standards:

  • Safety

    • UL 62368-1 Standard for Audio/video, information and communication technology equipment - Part 1: Safety requirements

    • CAN/CSA-C22.2 No. 60950-1 Information Technology Equipment – Safety

    • IEC 62368-1 Information Technology Equipment – Safety

    • IEC 60950-1 Information Technology Equipment – Safety CB Scheme report

    • IEC 60825-1 Laser safety

  • EMC

    • FCC 47 CFR, Part 15 Class A (2012) USA radiated emissions – Class A

    • IC ICES-003 Issue 6, Jan 2016 Canada radiated emissions – Class A

    • EN 300 386 V1.6.1 Telecom network equipment – EMC requirements Class A

    • EN 300 386 V2.1.1 Telecom network equipment – EMC requirements Class A

    • EN 55032:2012 + EN55032:2012/AC:2013 Electromagnetic compatibility of multimedia equipment – Emission requirements Class A

    • CISPR 32:2012 Electromagnetic compatibility of multimedia equipment – Emission Requirements Class A

    • EN 55024:2010/AC:2011 European radiated emissions Class A

    • CISPR 24 Information technology equipment - Immunity testing

    • EN 55035:2017 – Electromagnetic compatibility of multimedia equipment – Immunity requirements

    • CISPR 35:2016 – Electromagnetic compatibility of multimedia equipment – Immunity requirements

    • IEC/EN 61000 Series – Electromagnetic compatibility

    • AS/NZS CISPR 32:2015 Electromagnetic compatibility of multimedia equipment – Emission requirements Class A

    • VCCI-CISPR 32:2016 Japanese radiated and conducted emissions Class A

    • BSMI CNS 13438 – Taiwan radiated emissions Class A

    • KN32 and KN35 – Korea radiated emission (at 10 Meter) Class A

    • KN 61000 Series – Korea electromagnetic compatibility

    • TEC/SD/DD/EMC-221/05/Oct-16 – Electromagnetic compatibility

    • VCCI-V-3/2013.04 and V-4/2012.04 – Japanese radiated emissions Class A

    • TCVN 7189 – Vietnam Electromagnetic compatibility for Multimedia

    • TCVN 7317:2003 – Vietnam Electromagnetic compatibility for Multimedia

  • Network Equipment Building System (NEBS)

    • EN 300 019-2-1 – Environmental engineering

    • EN 300 019-2-2 – Equipment engineering

    • EN 300 019-2-3 – Environmental engineering

    • EN 300 753 – Equipment engineering

    • GR-63-CORE – Requirements, physical protection

    • GR-1089-CORE, Issue 7 – Acoustic noise

Compliance Statement for Argentina

EQUIPO DE USO IDÓNEO.

Compliance Statements for EMC Requirements for the PTX10008 and PTX10016 Routers

This topic describes the EMC requirements for the PTX10008 and PTX10016 routers for:

Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. Industry Canada does not guarantee the equipment will operate to the users’ satisfaction.

Before installing this equipment, users should ensure that it is permissible to connect the equipment to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the inside wiring associated with a single line individual service may be extended by means of a certified connector assembly. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

CAUTION:

Users should not attempt to make electrical ground connections by themselves, but should contact the appropriate inspection authority or an electrician, as appropriate.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

European Community

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Israel

Israel

Translation from Hebrew–Warning: This product is Class A. In residential environments, the product may cause radio interference, and in such a situation, the user may be required to take adequate measures.

Japan

Japan

The preceding translates as follows:

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

VCCI-A

Korea

Korea

The preceding translates as follows:

This equipment is Industrial (Class A) electromagnetic wave suitability equipment and seller or user should take notice of it, and this equipment is to be used in the places except for home.

United States

The PTX10008 and PTX10016 devices have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Nonregulatory Environmental Standards

These PTX Series product SKUs are designed to be Network Equipment Building System (NEBS) compliant:

  • PTX10008

  • PTX10016

For specific line card compliance, see Table 1.

Those device product SKUs are designed to meet the following NEBS compliance standards:

  • SR-3580 NEBS Criteria Levels (Level 3 Compliance)

  • GR-1089-CORE, Issue 7: EMC and Electrical Safety—Generic Criteria for Network Telecommunications Equipment

    • The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.

    • The battery return connection is to be treated as an Isolated DC return (DC-I), as defined in GR-1089-CORE.

  • GR-63-CORE: NEBS, Physical Protection

    • The equipment is suitable for installation as part of the Common Bonding Network (CBN).

    • The equipment is suitable for installation in a central office (CO).

Table 1: Line Card Compliance

Line Card

Compliance

PTX10K-LC1101

NEBS compliant

PTX10K-LC1102

NEBS compliant

PTX10K-LC1104

Data center GR-3160 compliant

PTX10K-LC1105

NEBS compliant

PTX10K-LC1201-36CD

NEBS compliant

PTX10K-LC1202-36MR

Data center GR-3160 compliant when installed in a PTX10008 router

QFX10000-60S-6Q

NEBS compliant