MX5, MX10, MX40 and MX80 Chassis Lifting Guidelines

The weight of a fully configured chassis is about 30 lb (13.6 kg). Observe the following guidelines for lifting and moving the router:

• Before moving the router, read the guidelines in MX5, MX10, MX40, and MX80 Site Preparation Checklist to verify that the intended site meets the specified power, environmental, and clearance requirements.

• Before lifting or moving the router, disconnect all external cables.

  To lift routing devices and components, use the following lifting guidelines:

  • Up to 39.7 lb (18 kg): One person.

  • 39.7 lb (18 kg) to 70.5 lb (32 kg): Two or more people.

  • 70.5 lb (32 kg) to 121.2 lb (55 kg): Three or more people.

  • Above 121.2 lbs (55 kg): Material handling systems (such as levers, slings, lifts and so on) must be used. When this is not practical, specially trained persons or systems must be used (riggers or movers).

• As when lifting any heavy object, lift most of the weight with your legs rather than your back. Keep your knees bent and your back relatively straight and avoid twisting your body as you lift. Balance the load evenly and be sure that your footing is solid.