Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

RJ-45 Connector Pinouts for an MX Series CB-RE or RCB Management Port

The port on the Control Board and Routing Engine (CB-RE; Routing and Control Board (RCB)) labeled MGMT is an autosensing 10/100/1000-Mbps Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the Routing Engine to a management LAN (or other device that supports out-of-band management).

Note:

In routers where the Routing Engine and Control Board (CB) are integrated into a single board, a CB-RE is known as Routing and Control Board (RCB). The RCB is a single FRU that provides Routing Engine and CB functionality.

Table 1 describes the RJ-45 connector pinout.

Table 1: RJ-45 Management Port Connector Pinouts for the CB-RE or RCB MGMT Port

Pin

Signal

Description

1

TRP1+

Transmit/receive data pair 1

2

TRP1–

Transmit/receive data pair 1

3

TRP2+

Transmit/receive data pair 2

4

TRP3+

Transmit/receive data pair 3

5

TRP3–

Transmit/receive data pair 3

6

TRP2–

Transmit/receive data pair 2

7

TRP4+

Transmit/receive data pair 4

8

TRP4–

Transmit/receive data pair 4